Canon imagePROGRAF iPF5000 Series Service Manual

Also see for iPF5000 - imagePROGRAF Color Inkjet Printer: Troubleshooting guide Troubleshooting guide Brochure & specs Brochure Information sheet

Contents

Canon imagePROGRAF iPF5000 Series Service Manual Manual pdf 43 page image

Chapter 22-3case, the printer may stop without capping the print head. If the power was turned on by unplugging the power cord, plug the power cord into the outlet, turn onthe power again so that the printer enters the online state, and then press the Power button to turn off the power.F-2-32.2.3 Print Control 0013-41321. Print modeThis printer is capable of fast, high-quality printing without blur and non-uniform density by changing the carriage operation, media feeding, other printing methodsaccording to the selected media type, print quality, print data and so on.Printing is performed for each color using a maximum of 16 paths in each print mode according to the selected print quality.This reduces density irregularities caused by the variation in the amounts of ink discharged from individual nozzles. In addition, it shifts the printing timing so thatthe current ink layer is nearly fixed before the next ink layer is applied, thus minimizing bleeding.Even in the same mode, the printer operates in a different way depending on the media setting made using the printer driver.a) Draft modeIn the draft mode, image data is thinned out and a single band (equivalent to the width of a nozzle array) is printed using one or two paths.To use this mode, select "Draft" under "Print Quality" in the printer driver.b) Standard modeIn the standard mode, a single band (equivalent to the width of a nozzle array) is printed using 1-6 (1, 2, 4, or 6) paths.To use this mode, select "Standard" under "Print Quality" in the printer driver.c) High quality modeIn the high quality mode, a single band is printed using 2, 4, or 8 paths.To use this mode, select "High" under "Print Quality" in the printer driver.d) Highest quality modeIn the high quality mode, a single band is printed using 8 or 16 paths.To use this mode, select "Highest" under "Print Quality" in the printer driver.T-2-1T-2-2Printing ModesMedia Type Print Priority Print Quality Print-pass Printing direction(*1) Print resolutionPlain PaperPlain Paper(High Quality)Plain Paper(High Grade)Image Draft 2-pass Bi-directional 1200x1200dpiStandard 4-pass Bi-directional 1200x1200dpiHigh 8-pass Bi-directional 1200x1200dpiLine Drawing/TextDraft 2-pass Bi-directional 1200x1200dpiStandard 4-pass Bi-directional 1200x1200dpiOffice Document Standard 4-pass Bi-directional 1200x1200dpiHigh Resolution PaperCoated PaperHeavyweight Coated PaperImage Standard 4-pass Bi-directional 1200x1200dpiHigh 8-pass Bi-directional 1200x1200dpiHighest 12-pass Bi-directional 2400x1200dpiPremium Matte PaperMatte Photo PaperImage Standard 6-pass Bi-directional 1200x1200dpiHigh 8-pass Bi-directional 2400x1200dpiHighest 16-pass Bi-directional 2400x1200dpiPower button OFFIf media remains,it is ejected evenwhen printing is in progress.Media ejectionPower-off automatic recoveryCappingSensor system power OFFBackup of various dataPower-offHold down for at least once secondWriting to EEPROM