Canon imagePROGRAF iPF5000 Series Service Manual

Also see for iPF5000 - imagePROGRAF Color Inkjet Printer: Troubleshooting guide Troubleshooting guide Brochure & specs Brochure Information sheet

Contents

Canon imagePROGRAF iPF5000 Series Service Manual Manual pdf 105 page image

Chapter 44-3F-4-54.3 Points to Note on Disassembly and Reassembly4.3.1 Note on assemblies (or units) prohibited from disassembly 0012-6349Assemblies that are prohibited from disassembly and their adjustment outside the factory cannot be conducted are indicated by red screws.F-4-64.3.2 Moving the carriage manually 0012-6350Move the carriage as required during disassembly/reassembly to prevent the carriage form contacting the parts to be removed.The carriage does not move when capped. When uncapping moving the carriage, refer to the procedures in DISASSEMBLY/REASSEMBLY>Points to Note onDisassembly and Reassembly>Opening the Caps and Moving the Wiper Unit.4.3.3 Units requiring draining of ink 0012-6351When disassembling the following units of the ink passage, drain ink complateil to prevent it from leaking. For how to drain ink, refer to DISASSEMBLY/REAS-SEMBLY > Pointe to Note on Disassembly and Reassembly > Draining the Ink.[1] Carriage unitRefer to DISASSEMBLY/REASSEMBLY > Pointsto Note on Disassembly and Reassembly > Carriage Unit.[2] Ink tank unitRefer to DISASSEMBLY/REASSEMBLY > Point to Note on Disassembly and Reassembly > Ink Tank Unit.Mist filter UFilter coverLower rear cover ULeft front cover URight upper cover JOperation panel EJTank cover JULeft cover JUCutter lifter unit EUOutput tray unitInk tube holder UJoint baseLower front cover ULeft/right circle coverPrinter Right cover J5Open top coverUpper front cover UMove carriage onto platenManual ink drainingAutomatic ink drainingSupport plate UInk tank unit 㧲 EUInk tank unit 㧾 EUCutter unit U