55AppendixFull option (maximum maximum ) configurationconfigurationWhen the Two-Knife Booklet Trimmer-A1, Booklet Trimmer-F1, Booklet Finisher-W1 PRO, Paper Folding Unit-J1, High Capacity Stacker-H1,Perfect Binder-E1, Multi Function Professional Puncher-A1, Document Insertion Unit-N1, Duplex Color Image Reader Unit-K1, Upright ControlPanel-G1, and Multi-drawer Paper Deck-C1 are attached.800 mm or more*47,574 mm1,765 mm1,000 mmor more *51,000 mmor more*51,000 mm or more*5*4 Regarding the rear side of the machine, be sure to secure at least 800 mm or more space for unrestricted operation.Make sure to provide at least 100 mm of space if none of the foregoing delivery/pickup system options shown in the illustration above are installed.*5 Be sure to secure at least 1000 mm or more space for service work.Also, make sure to provide at least 500 mm of space if none of the foregoing delivery/pickup system options shown in the illustration above areinstalled.Laser Safety Label Fixing UnitWhen removing jammed paper or when inspecting the inside of themachine, do not expose yourself to the heat emitted from the fixing unitand its surroundings for a prolonged period of time. Doing so may resultin low temperature burns, even though you did not touch the fixing unitand its surroundings directly.