54Installation PrecautionsAvoid installing the machine near computers or other precisionelectronic equipment.Electrical interference and vibrations generated by the machine whileprinting can adversely affect the operation of such equipment.Avoid installing the machine near televisions, radios, or similarelectronic equipment.The machine might interfere with sound and picture signal reception.Insert the power plug into a dedicated power outlet, and maintain asmuch space as possible between the machine and other electronicequipment.Moving the MachineIf you intend to move the machine, even to a location on the same floorof your building, contact your local authorized Canon dealerbeforehand. Do not attempt to move the machine yourself."Installation Space RequirementsProvide enough space on each side of the machine for unrestricted operation.Standard (minimum) configurationWhen the Copy Tray-R2, Duplex Color Image Reader Unit-K1, and Upright Control Panel-G1 are attached.1,952 mm1,524 mm100 mmor more*1*2500 mmor more*3500 mmor more*3500 mm or more*3*1 Regarding the rear side of the machine, be sure to secure at least 100 mm or more space for unrestricted operation.Make sure to provide at least 200 mm of space if you install Stack Bypass Alignment Tray-C2 and Long Sheet Tray-B1.*2 Regarding the rear side of the machine, be sure to secure at least 100 mm or more space for unrestricted operation.Make sure to provide at least 800 mm of space if you install one of the delivery/pickup system options illustrated below as a full set of unit.*3 Be sure to secure at least 500 mm or more space for service work.Also, make sure to provide at least 1000 mm of space if you install one of the delivery/pickup system options illustrated below as a full set of unit.