Setting Up the Machine for Using I-Fax 7-3I-Fax - Basic Operations7Setting Up the Machine for Using I-FaxBefore using I-Fax, it is necessary to specify the following settings from themachine's control panel.1. Network Settings2. Mail Transmission/Reception Settings3. Registering mail addresses in one-touch speed dialing and coded speed dialing. Network SettingsSpecify the machine's parameters in the network. To transmit/receive data using I-Fax onthe network, specify settings for the TCP/IP communication protocol. (See Chapter 2,"Setting the Network,"in the Sending Guide.) Mail Transmission/Reception SettingsSpecify settings of a subject, message text, signature, etc. for each registered mailaddress. Also, specify items related to e-mail transmission and reception. (See Chapter 3,"Setting Up a Mail Account," in the Sending Guide.) For values of the network settings,contact a network administrator. Registering Mail Addresses in the One-Touch/Coded Speed DialingRegister mail addresses, so that you can transmit mail with I-Fax by specifying thedestinations with one-touch/coded speed dialing or access code. You can also register thetransmission start time, transmission mode, etc., as well as the mail addresses in eachone-touch or coded speed dial address. (See Chapter 4, "Checking Settings andRegistering Destinations," in the Sending Guide.)
