Overview of Copying Operations4-2Copying - Basic Operations4Overview of Copying OperationsCopying operations of this machine are done from the control panel with the CopyBasic Features screen, Special Features screen, and Additional Functions menu.Press the appropriate keys on the control panel in accordance with the selectionson the LCD display.This section provides an overview of the copying functions of this machine. Copy Basic Features ScreenThe screen below appears when the machine is ready to make copies (Copy BasicFeatures screen). You can set the following basic copy features from this screen:Select the paper size automatically, or specify the paper size manually for a copy job.(See Chapter 2, "Basic Copying Features," in the Copying Guide.)Adjust the copy exposure and image quality automatically or manually. (See Chapter 2,"Basic Copying Features," in the Copying Guide.)Adjust the copy ratio automatically or manually. (See Chapter 2, "Basic CopyingFeatures," in the Copying Guide.)Collate the copies in page order. (See Chapter 2, "Basic Copying Features," in theCopying Guide.)Scan another original while the machine is printing a previous job. (See Chapter 1,"Introduction to Copying," in the Copying Guide.)Interrupt a reserved or current job in order to make higher priority copies. (See Chapter1, "Introduction to Copying," in the Copying Guide.) Special Features ScreenThe screen below appears when you press [Special Features] on the control panel(Special Features screen). You can set the following copy modes from this screen:
