Chapter 22-232.3 Checking the Connection to the Network2.3.1 Overview 0007-5605iR2270 / iR2870 / iR3570 / iR4570The instructions that follow apply only when the machine is connected to a network.If the user's network environment is based on TCP/IP, use the PING function to make sure that the network settingsare correct.If the user's network environment is based on IPX/SPX or AppleTalk, on the other hand, such a check need not bemade.2.3.2 Using the PING Function 0007-5600iR2270 / iR2870 / iR3570 / iR45701) Make the following selections in service mode: COPIER>TEST>NETWORK>PING.2) Enter the correct IP address using the control panel keypad, and press the OK key.3) Press the Start key.- If successful, the indication will be 'OK'. If the attempt fails, however, 'NG' will be indicated.F-2-64[1] Result (OK/NG)[2] IP address input2.3.3 Making a Check Using a Remote Host Address 0007-5603iR2270 / iR2870 / iR3570 / iR4570You can use a remote host address in combination with the PING function to check the connection to the network.The term "remote host address" refers to the IP address of a PC that is connected to the TCP/IP network to which themachine is connected.1) Inform the system administrator that you will be checking the network connection using the PING function.0. 0. 0. 0+/- OK < 1/1 > PING[2][1]
