Canon iPF600 series Service Manual

Also see for iPF610 - imagePROGRAF Color Inkjet Printer: Brochure Brochure Troubleshooting guide Brochure & specs Brochure

Contents

Canon iPF600 series Service Manual Manual pdf 73 page image

Chapter 22-72.2.3 Print Control 0017-47061. Print modeThis printer is capable of fast, high-quality printing without blur and non-uniform density by changing the carriage operation, media feeding, other printing methodsaccording to the selected media type, print quality, print data and so on.Printing is performed for each color using a maximum of 16 paths in each print mode according to the selected print quality.This reduces density irregularities caused by the variation in the amounts of ink discharged from individual nozzles. In addition, it shifts the printing timing so thatthe current ink layer is nearly fixed before the next ink layer is applied, thus minimizing bleeding.Even in the same mode, the printer operates in a different way depending on the media setting made using the printer driver.a) Draft modeIn the draft mode, image data is thinned out and a single band (equivalent to the width of a nozzle array) is printed using one path.To use this mode, select "Draft" under "Print Quality" in the printer driver.b) Standard modeIn the standard mode, a single band (equivalent to the width of a nozzle array) is printed using 1-6 (1, 2, 4 or 6) paths.To use this mode, select "Standard" under "Print Quality" in the printer driver.c) High quality modeIn the high quality mode, a single band is printed using 2, 4 or 8 paths.To use this mode, select "High" under "Print Quality" in the printer driver.d) Highest quality modeIn the high quality mode, a single band is printed using 12 or 16 paths.To use this mode, select "Highest" under "Print Quality" in the printer driver.T-2-1Printing Modes