Canon iPF600 series Service Manual

Also see for iPF610 - imagePROGRAF Color Inkjet Printer: Brochure Brochure Troubleshooting guide Brochure & specs Brochure

Contents

Canon iPF600 series Service Manual Manual pdf 269 page image

Chapter 88-18.1 Outline8.1.1 Outline 0012-6681The printer indicates errors using the display and LEDs.If an error occurs during printing, the printer status is also displayed on the status monitor of the printer driver.The following three types of errors are displayed on the display:- WarningStatus where the print operation can be continued without remedying the cause of the problem. This can, however, adversely affect the printing results.- ErrorStatus where the print operation is stopped, and the regular operation cannot be recovered until the cause of the problem is remedied.- Service call errorWhen a service call error occurs, the error is not cleared and the error indication remains on the operation panel even if the printer is powered off and on again.(Occurrence of the service call error is indicated again at power-on.)This measure is taken to prevent user's recovery of the service call error and damages to the printer.Service call errors can be cleared, however, by starting up the printer in the service mode.For how to take actions against warnings and errors, refer to "Troubleshooting".Overview of warnings and error codesT-8-1* "x" stands for a numeric or letter.8.2 Warning Table8.2.1 Warnings 0014-1952The codes correspond to the numbers shown on the DIPLAY in the service mode.T-8-2Code* Diagnosis0181010x-100x Ink warning01841001-1100 Waste ink warning0134122x-103x GARO warning01800500-1010 Printhead warning03xxxxxx-20xx,24xx Media feeding errorData mismatch errorCover open error03xxxxxx-2Exx03xxxxxx-25xx Ink error03xxxxxx-280x Printhead error03xxxxxx-281x Maintenance cartridge error03xxxxxx-282x Adjustment error03xxxxxx-2Fxx,26xx Head management sensor unit errorOther errorsExxx-40xx Service call errorCode Display massage Status1000 Ink Lv1: Chk BK ink tank is almost empty1001 Ink Lv1: Chk Y ink tank is almost empty1002 Ink Lv1: Chk M ink tank is almost empty1003 Ink Lv1: Chk C ink tank is almost empty1006 Ink Lv1: Chk MBK ink tank is almost empty1007 Ink Lv1: Chk MBK2 ink tank is almost empty100F Feed Limit... Force feed limit1010 Check printed document. Ink non discharging1100 Check maint cartridge capacity. Maintenance cartridge is almost full1221 GARO W1221 Unsupported command in GARO image mode1222 GARO W1222 Invalid number of parameters in GARO image mode (no parameter)1223 GARO W1223 Required item was omitted in GARO image mode1225 GARO W1225 Other warning in GARO image mode1231 GARO W1231 Unsupported command in GARO setting mode1232 GARO W1232 Invalid number of parameters in GARO setting mode1233 GARO W1233 Reauired item was omitted in GARO setting mode1234 GARO W1234 Data out of range in GARO image mode1235 GARO W1235 Other warning in GARO setting modePrepare for parts replacement. Call for service. Parts counter warning level 1Parts replacement time has passed. Call for service. Parts counter warning level 2