Canon iPF600 series Service Manual

Also see for iPF610 - imagePROGRAF Color Inkjet Printer: Brochure Brochure Troubleshooting guide Brochure & specs Brochure

Contents

Canon iPF600 series Service Manual Manual pdf 150 page image

Chapter 44-24.2 Disassembly/Reassembly4.2.1 Disassembly/Reassembly 0016-9451For the procedure for disassembly/reassembly of the components excluding the major components,refer to the paets catalog.Illustrations in the parts catalog are assigned illustration nombers according to the order in which parts are disassembled.4.3 Points to Note on Disassembly and Reassembly4.3.1 Note on locations prohibited from disassembly 0012-6349Assemblies that are prohibited from disassembly and their adjustment outside the factory cannot be conducted are indicated by red screws.Don't never loosen or remove the red screw, because normal operation and print can't be done if it is loosened or removed.F-4-24.3.2 Moving the carriage manually 0012-6350Move the carriage as required during disassembly/reassembly to prevent the carriage form contacting the parts to be removed.The carriage does not move when capped. When uncapping moving the carriage, refer to the procedures in DISASSEMBLY/REASSEMBLY>Points to Note onDisassembly and Reassembly>Opening the Cap/Moving the Wiper Unit.4.3.3 Units requiring draining of ink 0013-5095When disassembling the following units of the ink passage, drain ink complateil to prevent it from leaking. For how to drain ink, refer to DISASSEMBLY/REAS-SEMBLY > Pointe to Note on Disassembly and Reassembly > Draining the Ink.[1] Carriage unitRefer to DISASSEMBLY/REASSEMBLY > Points to Note on Disassembly and Reassembly > Carriage Unit.[2] Ink tank unitRefer to DISASSEMBLY/REASSEMBLY > Points to Note on Disassembly and Reassembly > Ink Tank Unit.F-4-3[1][2]