52EUsing the FullRange of FeaturesMENUMENUThe clear buttons above the LCD panel light up when the camcorder’s power ison, or only when one of the buttons is pressed, making it possible to play backcassettes when in dark surroundings. You can also change the color in which theylight up to green, orange, blue, yellow, turquoise (greenish blue) or purple.To change the color, open the menu and select SYSTEM. Then select LIGHTCOLOR, set it to the desired color and close the menu.Note:• You cannot change LIGHT COLOR when BUTTONLIGHT is set to OFF.To change the setting, open the menu and select SYSTEM. Then selectBUTTONLIGHT and set it to PUSH ON or OFF and close the menu.• ON: The buttons remain lit in the indicated color. When one of the buttons ispressed, all the buttons simultaneously change color. When the button isreleased, they return to the original color.• PUSH ON: Buttons light up only while one of them is pressed. All the buttonssimultaneously lights up in the indicated color. When the button is released,they turn off again after a few seconds.• OFF: Buttons do not light up.Adjusting the Selectable Color Light-up ButtonsTurning the buttons offChanging the color of the buttonsBUTTONLIGHT•ONSYSTEM( 40)LIGHT COLOR•TURQUOISESYSTEM( 40)+ , + , + , + PLAY(VCR)CARDCAMERACARDPLAY(VCR)TAPECAMERATAPE+ , + , + , + PLAY(VCR)CARDCAMERACARDPLAY(VCR)TAPECAMERATAPE
