119EUsing a Memory CardErasing Still ImagesCARD SLIDESHOWRECSEARCH RECSEARCHThis section describes how to erase the still image from the Card Operationsubmenu when playing back a single image in CARD PLAY (VCR) mode.(SINGLE or ALL)You can also erase a still image through CARD PHOTO REVIEW ( 114) orFile Operation menu ( 115).Make sure a memory card that has images recorded on it is inserted into thecamcorder.1. Select the image you want to erase.• Use the index screen ( 112) or card jump function ( 112) if necessaryand make sure the image you want to erase fills the display.• If you use the index screen, press the index screen button after selectingthe image. The image you selected fills the whole display.2. Open the menu and select CARD OPER.3. Select IMAGE ERASE.• CANCEL, SINGLE and ALL settings appear.• To cancel erasing, select CANCEL and close the menu.4. Select SINGLE.• ERASE THIS IMAGE? NO YES appears in the display.5. Select YES.• The image erases and the previous image appears for erasing.• To erase another single image, move to that image with the CARD +/–buttons, and select YES.• If the image you are trying to erase is a protected image, YES appears inpurple and is unselectable.• If you select NO, you return to step 4.6. Close the menu.To erase images one at a timeIMAGE ERASECARD OPER.( 40)+ PLAY(VCR)CARD
