110EUsing a Memory CardRecording from Another DV Device as a Still ImagePOWERCAMERACAMERAPLAY(VCR)OFFCARDTAPECARDTAPEPHOTOPHOTO1. Connect the camcorder to the other digital device.• Connect the Canon CV-150F DV cable (optional) with the sides of the plugsmarked with the arrows facing as shown above.2. Prepare the other device.• Turn on the power and load a recorded cassette.3. Load a memory card. Turn the camcorder’s POWER switch toPLAY (VCR).4. Move the TAPE/CARD switch to TAPE.• DV IN appears in the display.• If you have a cassette inserted, make sure it is in stop mode.Record images input through the DV in terminal onto the memory card as stillimages.• The still image’s data code will reflect the date and time it is recorded to thememory card.Preparations1. Start playback on the other device.2. When the image you want to record appears in the display, pressthe PHOTO button halfway down and hold it.• The image appears as a still image in the display.• The number of images that can still be recorded on the memory cardappears in the display.3. Press the PHOTO button fully down to record the image to thememory card.• The card access indicator flashes.Notes:• If you record an image onto a memory card that was originally recorded in the16:9 mode for wide screen TV’s, the image will appear to be vertically“squashed”(compressed).• The shutter sound doesn’t sound in TAPE PLAY (VCR) mode.RecordingSide with arrow Side with arrow: Signal flow
