170A470 Uploader initialization failed [crit] Application (Audio Server) MessagesB001 Starting and shutdown of audio server [info]B011 Audio client connected [info]B012 Audio client closed [info]B101 Error request received [notice]B102 Client connection denied [notice]B103 Client forcibly disconnected [notice]B201 Event notification failure [info]B202 Event reception failure [info]B203 Audio message send error [info]Description uploader initialization failure - %1 (A470)%1 Error numberMeaning The uploader could not be initialized.Countermeasure If the problem persists after rebooting thecamera, the camera is faulty, arrange forservicing.Description %1 audio. (B001)%1 starting | stoppingMeaning The audio server was started/shut down.Description [%1] %2 connected n=%3 (B011)%1 Client type (send | recv)%2 Client host IP address%3 Total number of clientsMeaning An audio client was connected.Description [%1] %2 closed n= %3 (B012)%1 Client type (send | recv)%2 Client host IP address%3 Total number of clientsMeaning An audio client was disconnected.Description %1 unusual request [%2] (B101)%1 Client host IP address%2 Error type (400 | 404)Meaning The request was denied due to a commanderror (400) or parameter error (404).Description %1 request denied [%2] (B102)%1 Client host IP address%2 Denial type (41 | 43 | ...)Meaning Client connection was denied due to anauthentication error (41), time specificationerror (42), insufficient resource (43),specification of unsupported codec (45),specification of unpermitted user level (47),too many clients (49) or invalid operationmode (4a).Countermeasure 41: Check user name, password or user listused when connecting. 42: Check playtimeor maximum connection time settings usedwhen connecting. 43: Reconnect or restart.45: Use supported client software. 47:Check user level used when connecting. 49:Check client number settings. 4a: Check ifusage of audio server is enabled.Description %1 access denied [%2] (B103)%1 Client host IP address%2 Denial type (41 | 42 | 4a)Meaning Connection was initially permitted, but the settinghas subsequently been changed to prohibitaccess, thereby triggering a forced disconnection(the denial type is the same with B102).Description cannot notify %1 event [%2] (B201)%1 Event type (ald)%2 Error numberMeaning The event notification failed.Description cannot recv event [%1] (B202)%1 Error numberMeaning The event could not be received.Description audio message send error %1 [%2] (B203)%1 Message type%2 Error numberMeaning The audio message could not be sent.
