3. Remove the Pulley Fixing Plate.• 1 E-ring4. Remove the 2 Pulleys (small and large).• 2 Parallel Pins5. Remove the Lifter Wire.Installation of the Lifter Wire■ Rear1. Slide the Side Guide Plate to the minimum paper size position.2. Put the Lifter Wires through the right and the left lifter holes on the Lifter Plate.• Long Lifter Wire: Put it through the left hole on the plate.• Short Lifter Wire: Put it through the right hole on the plate.NOTE:Red dot is marked on the Long Lifter Wire.4. Disassembly/Assembly74
