Other AdjustmentAdjusting the Pressure of the Deck Separation RollerIn case that the pickup failure or double feeding occurs, change the hook position of the pressure spring on the Deck SeparationRoller.■ Preparation1. Remove the Pickup Assembly.“Removing the Pickup Assembly” on page 54■ Procedure1. Change the hook position of the pressure spring.• Pickup failure : Hook the spring onto A.• Double feeding: Hook the spring onto B.%$Adjusting the Paper SeparationWhen double feeding occurs, adjust the deck air float fan airflow amount on the service mode to set appropriate paper separation.■ Actions at Replacement1. Remove the Right Cover.“Removing the Right Cover” on page 435. Adjustment96
