Start HereEasy Setup Instructions1 Unpack the Printer 2 Prepare the Printer 3 Install the Print Head 4 Install the Ink TanksCarefully remove all items from the box.Documentation andSoftware KitPrint HeadAC AdapterPower Cord1 Remove the shipping materials from the printer.Plug the Power Cord into the AC Adapter. Connect the DCplug to the printer. Plug the Power Cord into a power outlet.NOTE: You will need the Serial Number to register the product.Lift open the Paper Support and TURN THE PRINTER ON. Theprinter will initialize.IMPORTANT: Do not open the Print Head Cover before the print-er has finished initializing. Wait until the POWER lamp remainsfully lit.After the printer finishes initializing, open the Print HeadCover.4321 Remove the Print Head from its package.Remove the Protective Cap from the Print Head.NOTE: Do not touch the Print Head Nozzles.Press in on the Lock Button and raise the gray Lock Lever.Place the Print Head into the holder by aligning themark with the mark.Lower the Lock Lever until it clicks into place.54321 Remove the Black Ink Tank(BCI-15 Black) from its package,and pull off the Protective Cap.NOTE: To avoid spilling ink, do not touch the bottom of the tankonce you have removed the Protective Cap.Insert the Black Ink Tank into the back slot aligning themark with the mark.Press on the until the Ink Tank clicks into place.IMPORTANT: For correct printer operation, make sure ink tanksare secure in slots.Repeat the procedure for the Color Ink Tank(BCI-16 Color),inserting it into the front slot.Close the Print Head Cover.NOTE: The printer will perform a Print Head cleaning after thecover is closed. Wait until the process is complete before pro-ceeding.54321Continue with Step 5on side two.BCI-15 BlackInk TanksBCI-16 ColorInk TanksPIXMA iP90Photo PrinterNozzlesAC AdapterDC PlugPower CordSerial NumberPaper SupportPaper Output Slot CoverPrint HeadCoverPrint HeadCover1 23Print Head Covermark