Photo PrinterStart HereEasy Setup Instructions1 Unpack the Printer 2 Prepare the Printer 3 Install the FINE CartridgesCarefully remove all items from the box.Documentation and Software KitPower Cord1 Open the Paper Support and the Front Cover, then removethe Protective Material on the right side.Plug the Power Cord into the back of the printer and connectthe other end to a power outlet.NOTE: Do NOT connect the USB cable at this stage.TURN THE PRINTER ON. The printer will initialize. Wait untilthe POWER lamp remains fully lit.321 Open the Front Cover. The FINE Cartridge Holder automatical-ly moves to the left.Write down the serial number. You will need this to registerthe product.Remove the Color FINE Cartridge (CL-41) from its box.Remove the Protective Tape gently.NOTE:·Do not touch the electrical contacts or Print Head Nozzles ona FINE Cartridge. The printer may not print out properly if youtouch it.·Do not reattach the Protective Tape once you have removed it.·Handle the removed Protective Tape carefully to avoid gettingyour hands dirty or staining surrounding work area.Insert the Color FINE Cartridge slightly slanted into the rightslot (C).54321 Push up the FINE Cartridge until it clicks into place.IMPORTANT: For correct printer operation, make sure the FINECartridge is secure in slots.Repeat the procedure for the Black FINE Cartridge (PG-40),inserting it into the left slot (B).Close the Front Cover.NOTE: The printer will perform a Print Head Cleaning after thecover is closed. Wait until the process is complete before pro-ceeding.IMPORTANT: Wait until the preparatory operation is complete;this takes about one to two minutes.876Continue with Step 4on side two.PIXMA iP1700 Photo PrinterElectrical ContactsProtective TapeTo the FINE Cartridge HolderPrint Head NozzlesFINE CartridgesCL-41PG-40Power CordProtective Material Serial Number