Network Scan SettingsYou can connect your scanner or printer to a network to share it among multiple computers or scan imagesinto a specified computer.Important• Multiple users cannot scan at the same time.Note• Complete the network settings of your scanner or printer beforehand from the Setup CD-ROM or byfollowing the instructions our website.• With network connection, scanning takes longer than USB connection.Complete the following settings to enable scanning over a network.Specifying Your Scanner or PrinterUse IJ Network Scanner Selector EX to specify the scanner you want to use. By specifying the scanner,you can scan over a network from your computer or the operation panel.Important• If the product you want to use is changed with IJ Network Scanner Selector EX, the product used forscanning with IJ Scan Utility changes as well. The product for scanning from the operation panel alsochanges.If your scanner or printer is not selected in IJ Scan Utility, check that it is selected with IJ NetworkScanner Selector EX.Refer to "IJ Network Scanner Selector EX2 Menu and Setting Screen" for your model from Home ofthe Online Manual for details.• To scan from the operation panel, specify your scanner or printer with IJ Network Scanner SelectorEX beforehand.1. Check that IJ Network Scanner Selector EX is running.If IJ Network Scanner Selector EX is running, (IJ Network Scanner Selector EX2) appears in thenotification area on the desktop. Click to check the hidden icons as well.Note• If the icon is not displayed in the notification area on the desktop, follow the procedure below tostart.• Windows 10:From the Start menu, click All apps > Canon Utilities > IJ Network Scanner SelectorEX2.• Windows 8.1/Windows 8:Click IJ Network Scanner Selector EX2 on the Start screen.318
