Setting Items for Scanning Using Operation PanelYou can change the scan settings such as the scan size, resolution, or data format.When the Scan standby screen is displayed, tap Settings to select the setting item. Flick to display settingitems and tap the setting item to display the settings. Tap to specify the setting.Note• The scan setting cannot be specified under the following conditions:• When Auto scan is selected for Doc.type to forward the scanned data to the computer• When you forward the scanned data to the computer using WSD (one of the network protocolssupported in Windows)• Some settings cannot be specified in combination with the setting of other setting item, the documenttype selected for Doc.type, or the scan menu on the screen for selecting to which you save the data. Ifthe setting which cannot be specified in combination is selected, and Error details are displayed onthe touch screen. In this case, tap on the upper left on the touch screen to check the message andchange the setting.• The specified scan settings such as the scan size, resolution, and data format are retained even if theprinter is turned off.• When scanning starts in the scan menu that is not available with the specified setting, The specifiedfunction is not available with current settings. is displayed on the touch screen. Change the setting,following the on-screen instructions.• When you forward the scanned data to the computer or attach the data to an e-mail, you can specifythe destination and file name using Canon IJ Scan Utility.• For Windows:Settings Dialog Box• For Mac OS:Settings Dialog• If you scan originals from the computer, you can scan with advanced settings. For more on scanningfrom the computer:• For Windows:Scanning Photos and Documents• For Mac OS:Scanning Photos and Documents328
