Forwarding Scanned Data to Computer Using Operation PanelBefore forwarding scanned data to the computer, check the following:• MP Drivers are installed. (Windows)If MP Drivers are not yet installed, install MP Drivers with the Setup CD-ROM or install them from theCanon website.• The scanner driver is installed. (Mac OS)If the scanner driver is not yet installed, install the scanner driver from the Canon website.• The printer is connected to a computer correctly.Make sure the printer is connected to the computer correctly.Do not plug in or unplug the USB cable while the printer is in operation, or when the computer is in thesleep or standby mode.If you perform scanning via a network connection, make sure all the required settings have beenspecified.◦ For Windows:Network Scan Settings◦ For Mac OS:Network Scan Settings• The destination and the file name are specified in Canon IJ Scan Utility.You can specify the destination and the file name in Canon IJ Scan Utility. For more on settings ofCanon IJ Scan Utility:◦ For Windows:Settings Dialog Box◦ For Mac OS:Settings DialogFor Mac OS X 10.11, starting Canon IJ Scan Utility is required to forward the scanned data to yourcomputer.Follow the procedure below to forward scanned data to the computer.1. Make sure printer is turned on.2. Select Scan on the HOME screen.Using the Operation PanelThe screen for selecting to which you save the data is displayed.323
