If IJ Network Scanner Selector EX2 is not displayed on the Start screen, select theSearch charm, then search for "IJ Network Scanner Selector EX".• Windows 7/Windows Vista:From the Start menu, click All Programs > Canon Utilities > IJ Network ScannerSelector EX2 > IJ Network Scanner Selector EX2.The icon appears in the notification area on the desktop, and the Scan-from-PC Settings screenappears. In that case, skip ahead to Step 3.2. In the notification area on the desktop, right-click (IJ Network Scanner Selector EX2),then select Settings....The Scan-from-PC Settings screen appears.3. Select your scanner or printer from Scanners.Normally, the MAC address of your scanner or printer is already selected after the network setup. Inthat case, you do not need to select it again.Important• If multiple scanners exist on the network, multiple model names appear. In that case, you canselect one scanner per model.4. Click OK.Note• The scanner selected in the Scan-from-PC Settings screen will be automatically selected in the Scan-from-Operation-Panel Settings screen as well.Setting for Scanning with IJ Scan UtilityTo scan from IJ Scan Utility using a scanner or printer connected to a network, specify your scanner orprinter with IJ Network Scanner Selector EX, then follow the steps below to change the connection statusbetween it and the computer.1. Start IJ Scan Utility.2. Select "Canon XXX series Network" (where "XXX" is the model name) for ProductName.3. Click Settings... to use another scanner connected to a network.4. Click (General Settings), then click Select in Product Name.The Scan-from-PC Settings screen of IJ Network Scanner Selector EX appears.319
