Chapter 10 95Routine MaintenanceSee “Turning on the Machine” on page 19.2 Press [Menu].3 Display the Maintenance screen.(1) Use [ ] or [ ] to select , then press [OK].The Maintenance/settings screen is displayed.(2) Use [ ] or [ ] to select , then press [OK].The Maintenance screen is displayed.(3) Use [ ] or [ ] to select the setting item, then press [OK].The setting screen for the selected item is displayed. Printing the Nozzle Check PatternPrint the nozzle check pattern to determine whether the ink ejects properly from the Print Headnozzles and to verify Print Head alignment. Use this function when printed results are blurred orthe color is incorrect.1 Press [ON/OFF] to turn on the machine, then load a sheet of A4 or Letter-sizedplain paper in the Auto Sheet Feeder or the Cassette.See “Turning on the Machine” on page 19 and “Loading Paper” on page 21.2 Use [Feed Switch] to select the paper source where you have loaded paper.3 Printing the nozzle check pattern.Note Ensure that the Inner Cover is closed.(1)(2)(3)
