Canon PIXMA MP500 User Manual

Also see for PIXMA MP500: Supplementary guide Specification sheet Start here Service manual User guide

Contents

Canon PIXMA MP500 User Manual Manual pdf 67 page image

Chapter 4 65Printing Photographs Directly from a Compliant Device(3) Turn on and set up the device for direct printing.Either of the following icons will display on the LCD display of the device when themachine is correctly connected.A PictBridge compliant device.A Canon Bubble Jet Direct compatible digital camera.Printing Photographs Directly from a PictBridgeCompliant DeviceWhen operating the device, be sure to follow the instructions given in the instruction manual suppliedwith the device. Let’s take a look at the page size, media type, layout, image optimization modes,and date printing mode that can be set on a PictBridge compliant device connected to the machine. Checking or Changing PictBridge Print Settings from Your CameraTo change the page size or media type, operate the device to select the PictBridge print setupmode and confirm or change the settings.The settings below can be changed by pressing [Settings] in Memory card mode of this machinewhen a PictBridge compliant device is connected. However, changes can be made on theSettings screen (Memory Card) only when the corresponding items below are in the “Default”(selections based on the machine setting) using the controls of the device.About the Settings Explained BelowThe settings explained on the following pages cannot be made on some devices. If any settingcannot be made, the defaule setting explained above is used.* Names of settings that are displayed on Canon PictBridge compliant device are used in thedescription given below. Different names may be displayed on your device depending on thebrand or model.About Image Data Format for PrintingThis machine accepts images* taken with a camera compatible with the Design rule for CameraFile System and PNG files.* Exif2.21 compliantAbout “Page size” and “Media type”When the “Default” (selections based on the machine setting) is selected, the machine operatesbased on the and the settings specified in the Memory card mode ofthe machine.Note If neither of these icons appear, see “Cannot Print Properly from theDigital Camera” on page 121.PictBridge compliant devicesetting itemsMachine setting on the Print Setting screenPage size : Default You can change the machine settings of (1), (2), and (4)on tab1.For the setting items, see “Memory card mode” onpage 37.Media type : DefaultLayout : DefaultImage optimize : Default You can change the machine settings on tab 2.For the setting items, see “Memory card mode” onpage 37.