|
44 Chapter 2Copying(2) Use [ ] or [ ] to select <4-on-1 copy> and press [OK].(3) Use [ ] or [ ] to select the layout, then press [OK].(4) Follow the on-screen instructions to load the first document to print on the Platen Glass,then press [OK].(5) Specify the necessary items.See “To Change Print Settings” on page 35.(6) Press [Color] for color copying, or [Black] for black & white copying.(7) Load the second document to print on the Platen Glass, and press the same button asyou pressed in step 6.(8) Repeat step 7 until you finish loading the fourth document, then press the same button asyou pressed in step 6. If you have only one, two or three documents to scan, press [OK]after loading the last document.z Creating Stickers (Sticker Copy)You can easily make stickers from 4" x 6" / 101.6 x 152.4 mm photos or graphics using Canonsticker paper.Procedure:(1) Display the Special copy screen.See “Special Copy” on page 41.(2) Use [ ] or [ ] to select , then press [OK].(3) Use [ ] or [ ] to select .You can only print in the Stickers x 16 layout though other layouts appear on the LCD.Use the special sheets of stickers.(4) Follow the on-screen instructions to load the document on the Platen Glass, then press[OK].(5) Specify the necessary items.See “To Change Print Settings” on page 35.Important If you do not press the same button in step 6 and steps 7 and 8, themachine does not start copying.Note z This function cannot be used in conjunction with other copy functions.z If appears on the LCD when scanning, setthe print quality to and try copying again.z This function can be used only when page size is set to <8.5" x 11"(215 x 279)> or .z You cannot specify for this function.Platen Glass (place document face down)16 stickersStickers x16
|
