153ConnectingA video-compatible television connected via the supplied AV cableAVC-DC300 can be used to view images as you shoot or replay them.Viewing Images on a TV Set1 Turn off the camera (p. 30).z Also turn the television off.2 Attach AV Cable AVC-DC300 tothe A/V OUT terminal on thecamera.3 Plug the other ends of the AVcable to the video in and audio injacks on the TV.4 Turn on the TV and switch it to Video mode.5 Turn the mode lever to or (p. 29, 30).z The image will appear on the TV. Shoot or play back images asusual.z No image will appear on the LCD monitor (or in the viewfinder)when the camera is connected to a TV monitor.z The video output signal can be switched (NTSC or PAL) toaccommodate different regional standards (p. 50). The defaultsetting will vary between regions.NTSC: Japan, U.S.A., Canada, Taiwan, etc.PAL: Europe, Asia (excluding Taiwan), Oceania, etc.If an incorrect video system is set, the output image will notdisplay properly.z If the TV is a stereo model, you can plug the audio plug intoeither the left or right Audio In jack. Please refer to the TV’smanual for details.z A TV set cannot be used in mode.To the VideoIn JackTo the AudioIn JackBlackPlugYellowPlug
