CHAPTER 8 INSTALLATIONCOPYRIGHT © 1999 CANON INC. CANON NP6317 REV.0 APR. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON) 8-5C. Checking the OperationWorkTurn the door switch ON using the doorswitch actuator.Connect the power plug, and shift thePOWER switch to "ON".Set the cassette size to suit the needs of theuser.Put copy paper in the cassette, and set thecassette in the copier.Set the copy tray on the copier.Open the copyboard cover, and remove theprotection seal and the cushions.Record the reading of the copy counter.After making any copies of the following,the COPY START key goes red.[1] making 7 continuous copies on A3[2] making 9 continuous copies on A4[3] making 5 single copies on A3[4] making 5 single copies on A4Check that the counter operates properly.Step123456789RemarksCheck that the ADD PAPER and CAS-SETTE OUT indicators go ON and theWAIT indicator lights red.See p. 8-8.• Check that the ADD PAPER indicator goesOFF.• Press the keys, except the COPY STARTkey, on the control panel, and check thateach operation is correct.Check the following:• No abnormal sound is heard.• The ADD TONER indicator starts to flashwhen the Copy key on the control panelturns red at the end of copying for any ofthe following:[1] making 7 continuous copies on A3[2] making 9 continuous copies on A4[3] making 5 single copies on A3[4] making 5 single copies on A4Check that the reading has increased by 2from the reading recorded in step 7.
