3) Remove the two mounting screws r, and disconnect the connector t; then, removethe developing fan y.Figure 7-4355. Removing the Cleaner Fan1) Remove the rear cover.2) Remove the three mounting screws, and shift the high-voltage transformer PCB.3) Remove the two mounting screws q, and disconnect the connector w; then, removethe developing fan assembly e.Figure 7-436qw errtyCOPYRIGHT © 1997 CANON INC. CANON NP6350/NP6251 REV. 0 JULY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)CHAPTER 7 EXTERNALS/AUXILIARY MECHANISMS7-32Download service manual and resetter printer at http://printer1.blogspot.com
