• When connecting a device and the printer in access point mode, Internet connection may becomeunavailable. In that case, web services for the printer cannot be used.• In access point mode, you can connect up to five devices at the same time. If you try to connect asixth device while five devices are already connected, an error will appear.If an error appears, disconnect a device that does not use the printer, then configure settings again.• Devices connected to the printer in access point mode cannot communicate with each other.• Firmware updates for the printer are not available while using the access point mode.• When a device has been connected to the printer without using an access point and you want to set itup again using the same connection method, disconnect it first. Disable the connection between thedevice and printer in the Wi-Fi setting screen.Connection Using a Wired Network• This printer cannot be used over wireless and wired connections at the same time.• When using a router, connect the printer and a device to the LAN side (same network segment).42