Communication mode InfrastructureChannel XXWireless LAN security Inactive/WEP(64bit)/WEP(128bit)/WPA-PSK(TKIP)/WPA-PSK(AES)/WPA2-PSK(TKIP)/WPA2-PSK(AES)IPv4 address XXX. XXX. XXX. XXXIPv4 subnet mask XXX. XXX. XXX. XXXIPv4 default gateway XXX. XXX. XXX. XXXIPv6 address XXXX: XXXX: XXXX: XXXX:XXXX: XXXX: XXXX: XXXXIPv6 subnet prefix length XXXIPv6 default gateway XXXX: XXXX: XXXX: XXXX:XXXX: XXXX: XXXX: XXXXMAC address XX:XX:XX:XX:XX:XXIPsec settings Enable (ESP)/Enable (ESP & AH)/Enable (AH)/DisablePre-shared key XXXXXXXXXXXXXXXXPrinter name XXXXXXXXXXXXXXXBonjour service name XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX("XX" represents alphanumeric characters.)◦ AP mode setting listThe list of access point mode settings of this machine is displayed on the touch screen.The following setting items are displayed.Items SettingConnection Active/InactiveSSID XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXPassword XXXXXXXXXXCommunication mode Access point modeChannel 3Wireless LAN security Inactive/WPA2-PSK(AES)IPv4 address XXX. XXX. XXX. XXXIPv4 subnet mask XXX. XXX. XXX. XXX241