Error Message Appears on PictBridge (Wireless LAN) CompliantDeviceThe following errors may occur when you print directly from a PictBridge (Wireless LAN) compliant device.Follow the instructions below to resolve them.Note• This section describes errors that appear on Canon-brand PictBridge (Wireless LAN) compliantdevices. The error messages and operations may vary depending on the device you are using. Forerrors on other brands of PictBridge (Wireless LAN) compliant devices, check the status of the Alarmlamp and take the appropriate action to clear the error. For details, see An Error Occurs.• For the errors indicated on the PictBridge (Wireless LAN) compliant device and their solution, also referto the instruction manual of the device. For other device problems, contact the manufacturer.Error Message onPictBridge(Wireless LAN)Compliant DeviceWhat to Do"Printer in use" If the machine is printing from the computer or warming up, wait until it finishes.When it is ready, the machine starts automatically.If the machine is not printing from a computer or warming up, check the number of how manythe Alarm lamp flashes and take the appropriate action to resolve the error.An Error Occurs"No paper" Load paper and select Continue* in the display of your PictBridge (Wireless LAN) compliantdevice.* Alternatively, load paper and press the Color button or the Black button on the machine toresume printing."Paper Error" Check the number of how many the Alarm lamp flashes and take the appropriate action toresolve the error.An Error Occurs"Paper jam" Select Stop in the display of your PictBridge (Wireless LAN) compliant device to stop printing.Remove the jammed paper, load new paper, press the Color button or the Black on themachine, and then try printing again."Printer cover open" Close the paper output cover on the machine."No print head" Check the number of how many the Alarm lamp flashes and take the appropriate action toresolve the error.An Error Occurs816
