Printing Network SettingsUse the operation panel to print the machine's current network settings.Important• The network settings printout contains important information about your network. Handle it with care.1. Make sure machine is turned on.2. Load two sheets of A4 or Letter-sized plain paper.3. Press and hold Wi-Fi button and release it when ON lamp flashes.4. Press Wi-Fi button again.The machine starts printing network settings information.The printed network settings information is as follows:Item Description SettingProduct Information Product information –Product Name Product name XXXXXXXXROM Version ROM version XXXXXXXXSerial Number Serial number XXXXXXXXWireless LAN Wireless LAN Enable/DisableMAC Address MAC address XX:XX:XX:XX:XX:XXWPS PIN CODE WPS PIN code XXXXXXXXInfrastructure Infrastructure Enable/DisableConnection Connection status Active/InactiveSSID SSID Wireless LAN SSIDChannel *1 Channel XX (1 to 11)Encryption Encryption method None/WEP/TKIP/AESWEP Key Length WEP key length (bits) Inactive/128/64Authentication Authentication method None/auto/open/shared/WPA-PSK/WPA2-PSKSignal Strength Signal strength 0 to 100 [%]TCP/IPv4 TCP/IPv4 EnableIP Address IP address XXX.XXX.XXX.XXXSubnet Mask Subnet mask XXX.XXX.XXX.XXX242
