Changing WEP Detailed SettingsNote• This function is not available depending on the printer you are using.To change the wireless network settings of the printer, connect the printer and the computer with a USBcable temporarily. If you modify the wireless network settings of the computer over wireless connectionwithout USB connection, your computer may not be able to communicate with the machine after modifyingthe settings.1. Start up IJ Network Tool.2. Select printer in Printers:.When the printer is connected to the computer with a USB cable temporarily, select the printer with"USBnnn" (where "n" is a number) appearing in the Port Name column.3. Select Configuration... on Settings menu.4. Click Wireless LAN tab.5. Select Use WEP in Encryption Method: and click Configuration....The WEP Details screen is displayed.6. Change or check settings.When changing the password (WEP key), the same change must be made to the password (WEP key)of the wireless router.1. WEP Key:Enter the same key as the one set to the wireless router.The number of characters and character type that can be entered differ depending on thecombination of the key length and key format.Key Length64bit 128bitKey Format ASCII 5 characters 13 charactersHexadecimal (Hex) 10 digits 26 digits250
