An Error OccursIf an error occurs in printing, for example if the paper runs out or jams, a troubleshooting message appearsautomatically. Take the appropriate action described in the message.When an error occurs, the Alarm lamp flashes and a support code (error number) appears on the computerscreen. For some errors, the ON lamp and the Alarm lamp flashes alternately. Check the status of thelamps and the message, and take the appropriate action.Support Code Corresponding to Number of Flashes of Alarm LampExample of 2 times flashing:(A) Flashes(B) Goes offNumber of flashes Cause Support Code2 flashes Machine is out of paper or paper does not feed. 1003Paper size in print settings and size of loaded paper do not match. 2100, 21013 flashes Paper output tray is closed. 1250Paper is jammed in paper output slot. 1300Paper is jammed near transport unit. 1303Paper is jammed during automatic duplex printing. 13044 flashes FINE cartridge is not installed properly. 16875 flashes FINE cartridge is not installed. 1401FINE cartridge cannot be recognized. 1403Appropriate ink cartridge is not installed. 14856 flashes Paper output cover is open. 1202FINE cartridge is not installed in correct position. 1486, 14878 flashes Ink absorber is almost full. 1702, 1703, 1704,1705, 1712, 1713,1714, 1715806
