90 PhotosIMPORTANT• When capturing photos on an Eye-Fi card, photos will be uploadedautomatically if you are within the range of a configured network. Alwaysverify that Eye-Fi cards have been approved in the country/region ofuse. See alsoUsing an Eye-Fi card ( 122).NOTES• The data code of the photos will reflect the date and time of recording ofthe original scene.• Photos captured from a scene with a lot of fast movement may beblurred.• / / Photos will be recorded on the memory selected forrecording photos.Protecting PhotosYou can protect photos from accidental erasure.Protecting Single Photos1 In single photo view, open the photo selection screen.[ Protect] appears on the screen.2 Select ( ) the photo you want to protect.3 Press to protect the photo.appears on the bottom bar and the photo cannot be deleted. Pressagain to remove the protection.4 Repeat steps 2-3 to protect additional photos or presstwice to close the menu.Protecting Photos from the Index Screen1 Open the photo index screen.Operating modes:[ Protect]FUNC.FUNC.