Canon LEGRIA HFR16 Instruction Manual

Also see for HFR17: Instruction manual

Contents

Canon LEGRIA HFR16 Instruction Manual Manual pdf 146 page image

146 Additional Information- Disconnect the USB cable and turn off the camcorder. After a short while, turn it on again andrestore the connection.- Connect the camcorder to a different USB port on the computer.- The camcorder will not be recognized while all photos are being deleted or all print orders arebeing removed.The printer is not working even though the camcorder and printer are connected correctly.- [USB Connection Type] is set to [DVD Burner]. Set it to [Computer/Printer] or to[Connect and Set].- Disconnect the USB cable and turn off the printer. After a short while turn it on again andrestore the connection.- Cannot connect to a PictBridge-compatible printer if the memory contains 2,500 photos or more.The camcorder does not recognize the DW-100 DVD Burner even though it is connected correctly.- [USB Connection Type] is set to [Computer/Printer]. Set it to [DVD Burner] or to[Connect and Set].- Using the optional DW-100 DVD Burner, discs cannot be created from recordings on an SDXCmemory card. To create discs using the DW-100, make sure in advance that your recordingsare in the built-in memory or on an SD or SDHC memory card.- If you connect the optional DVD Burner while the index screen is showing the recordings onthe SDXC memory card, the DVD Burner may not operate correctly. In that case, disconnectthe USB cable and turn off the DVD Burner.After connecting the camcorder to a printer, the message [Busy] continues to appear on the screen.- Disconnect the USB cable and restore the connection after a short while.Photos are not correctly printed.- You may not be able to print correctly, using a PictBridge-compatible printer, photos whosefile names have been changed or that were recorded, created, edited or changed usinganother device and then transferred to a memory card connected to a computer.Cannot save photos on my computer’s hard disk.- When the memory contains 2,500 photos (Windows)/1,000 photos (Mac OS) or more, youmay not be able to transfer photos to a computer. / / Try using a cardreader to transfer the photos on the memory card. To transfer the photos in the built-in mem-ory, copy them to the memory card in advance ( 91).List of MessagesFollowing the list of messages for the camcorder you can find separatelists for print-related messages ( 154) and for messages that appearonly when using the optional DW-100 DVD Burner ( 152).Accessing the memory card. Do not remove the memory card.- You opened the memory card slot cover while the camcorder was accessing the memory cardor the camcorder started accessing the memory card as you opened the memory card slotcover. Do not remove the memory card until this message disappears.(in alphabetical order)