Video 59• The adjustment range and the length of the exposure adjustmentindicator will vary depending on the initial brightness of the picture.• If you operate the zoom, the brightness of the image may change.3 Adjust the ( ) the brightness of the image as required, thenhide ( ) the joystick guide.• The exposure adjustment indicator will change to white and theselected exposure will be locked.• During exposure lock, press twice to return the camcorder toautomatic exposure.NOTES• If the recording program is changed during exposure lock, the cam-corder will return to automatic exposure.Manual Focus AdjustmentAutofocus may not work well on the following subjects. In such case,focus manually.* Available only for movies.POINTS TO CHECK• Adjust the zoom before you start the procedure.1 Open ( ) the joystick guide.2 Select ( ) [ Focus] and press .The current focus is locked and [MF]appears.3 Push the joystick ( ) or ( ) once toverify if the image is focused.• Reflective surfaces• Subjects with low contrastor without vertical lines• Fast moving subjects• Through wet windows• Night scenesOperating modes: *Focus