Video 39• Be sure to save your recordings regularly ( 105), especially after mak-ing important recordings. Canon shall not be liable for any loss or cor-ruption of data.NOTES• About the Power Save mode: If [Power Saving Mode] is set to[ On], the camcorder will shut off automatically to save power whenit is powered by a battery pack and is left without any operation for 5minutes. Press to turn on the camcorder.• When recording in bright places, it may be difficult to use the LCDscreen. In such cases, you can turn on the LCD backlight ( 23) oradjust the brightness of the LCD screen with the [LCD Bright-ness] setting.Selecting the Video Quality (Recording Mode)The camcorder offers 4 recording modes. Changing the recordingmode will change the recording time available on the memory. SelectFXP or XP+ mode for better movie quality; select LP mode for longerrecording times. The following table gives approximate recordingtimes.NOTES• The camcorder uses a variable bit rate (VBR) to encode video so theactual recording times will vary depending on the content of the scenes.• The camcorder retains the last setting used even if you set the cam-corder to mode.POWEROperating modes:[ Standard Play 7 Mbps] Desired recordingmodeFUNC.FUNC.
