Canon L100 Service Manual

Also see for FAXPHONE L100: Basic operation guide Starter Guide Technical information

Contents

Canon L100 Service Manual Manual pdf 25 page image

22 2-22-2Technical Overview > Basic Configuration > Basic Sequence > Basic Sequence of OperationTechnical Overview > Basic Configuration > Basic Sequence > Basic Sequence of OperationBasic ConfigurationConfiguration functionThe machine may be broadly divided into the following 6 functional blocks: controlsystem,original exposure system, laser exposure system, image formation system, pickupfeed system and fixing system.Original exposure systemExternal deviceControl systemLaser exposure systemPickup feed systemImage formation systemFixing systemMaincontrolerEnginecontrolerPowersupplyF-2-1Basic Sequence■ Basic Sequence of OperationThe engine controller controls the operation sequence. The following table provides an outlineof machine operation occurring from when the power switch is turned on to when printingends and Main Motor (M1) stop, indicating the purposes of intervals and engine operation.Interval Purpose RemarksWAIT(Wait)From power-ON until initialdrive for Main Motor (M1) iscompleted.To clear potential from the drumsurface and to clean the transferroller.Also to bring the heatertemperature up to the targetedtemperature.Detect whether theToner cartridge isinstalled or not.STBY(Standby)From the end of the WAITperiod or the LSTR perioduntil the print command issent from the main controller.Or, from the end of the LSTRperiod until power switch isturned OFF.To keep the printer ready toprint.INTR(initialrotation)From the input of the printcommand from the maincontroller until the PickupSolenoid (SL1) is turned ON.To stabilize the photosensitivedrum sensitivity in preparationfor printing. Also to clean thetransfer roller.PRINT(print)From the end of the INTRperiod until the PaperLeading Edge Sensor(PS751) detects the trailingedge of paper.To form image on thephotosensitive drum based onthe VIDEO (/VDO, VDO) signalsinput from the main controller,and to transfer the toner imageonto paper.LSTR(lastrotation)From the end of PRINTperiod until the Main Motor(M1) stops.To deliver the last papercompletely out of the printer.Return to the INTRperiod as soon asanother print commandis sent from the maincontroller.T-2-1