Canon L100 Service Manual

Also see for FAXPHONE L100: Basic operation guide Starter Guide Technical information

Contents

Canon L100 Service Manual Manual pdf 15 page image

11 1-31-3Product Overview > Specifications > ADF SpecificationsProduct Overview > Specifications > ADF SpecificationsSpecificationsProduct SpecificationsCopyboard Stream readingMachine installation method DesktopLight source LEDImage reading method CISPhotosensitive medium OPC Drum (φ24 mm )Exposure method Laser beam (semiconductor laser)Charging method Roller charging methodDeveloping method Jumping development methodTransfer method Roller transfer methodSeparation method Curvature separationPaper feed method Pickup Tray : Pad separation methodMulti-purpose Tray : NoneDelivery method Face-downDrum cleaning method Blade cleaningFixing method On-demand methodToner supplying method Toner Cartridge replacementToner level detection YesDocument type SheetMaximum document size 216 mm×356 mmMagnification ratio 100 % magnification50 to 200 % (in increments of 1 %)Resolution at reading 600 dpi × 600 dpi600 dpi x 196 dpi/600 dpi x 392 dpi (At the time of FAX)Print resolution 600 dpi x 400 dpi/600 dpi x 600 dpi *Warm-up time Minimum (without Toner Cartridge replacement): 14 sec. or less /When a new Toner Cartridge is installed: 42 sec. or lessFirst print time 7.7 sec. or less (LTR, default setting)First copy time 21.3 sec. or less (LTR, default setting)Print speed 18 ppm mode setting:19 ppm (LTR)12 ppm mode setting: 12.4ppm(LTR)Copy speed 12.4 ppm (LTR) **Paper size Fixed size:A4, B5, A5, LGL, LTR, Statement, Executive, Officio, B-officio,M-officio, Government-Letter, Government-Legal, Foolscap,A-foolscap, Envelope COM10, Envelope C5, Envelope B5,Envelope DLCustom size:Width: 76.2 to 216 mm, Length: 127 to 356 mmPaper types Plain paper (60 to 89 g/m2), Heavy paper (90 to 163 g/m2), Roughpaper (60 to 163 g/m2), Transparency, Label, EnvelopePickup Tray capacity Approx. 150 sheets (plain paper: 60 to 80 g/m2)Delivery Tray capacity Approx. 60 sheets (plain paper: 60 to 80 g/m2)Environment temperature range 10 to 30 degrees CentigradeEnvironment humidity range 20 to 80 %Duplex method NoneHost Interface Standard: USB/Hi-speed USB, Options: NoneHard disk capacity Standard: None, Options: NoneMemory capacity Standard: 64 MB, Options: NonePower supply AC110 to 127 V +/- 10 %, ( 50,60 Hz +/- 2 Hz)AC220 to 240 V +/- 10 %, ( 50,60 Hz +/- 2 Hz)Maximum power consumption 900 W or less (120 V), 1020 W or less (230 V)Power consumption 410 W or less (120 V), 400 W or less (230 V)External dimensions (W x D xH) 372 × 276 × 254 mmWeight L100 / L170 / L174Approx. 8.24 kg (including Toner Cartridge)L150Approx. 8.0 kg (including Toner Cartridge)L150 CHN / L150 KOR / L154Approx. 8.2 kg (including Toner Cartridge)*: Resolution switchingWith this machine, 2 types of resolution can be switched by setting "Copy Type" on theprinter driver.Speed priority (at the time of shipment): 600 dpi × 400 dpiResolution priority: 600 dpi × 600 dpi**: Copy : 600 dpi x 600 dpi onlyADF SpecificationsDocument Exposure LEDDocument Scan document stream reading by fixed contact image sensor (CIS)Scanning Resolution 600 dpi (horizontal scanner) X 600 dpi (vertical scanner)Number Of Gradations 256Magnification 50 % to 200 % (1 % increment)horizontal : image processing by Main Controller PCBvertical : image processing by Main Controller PCBLens CIS/ColorCIS Unit number of lines: 1 linenumber of pixels: 5148 pixels as total pixels (5107 pixels aseffective pixels)maximum document scanning width: 216 mmDocumentdrive control CIS is fixed, and does not execute drive control.Document is moved by the DF Motor, which is controlled by theMain Controller PCB.Document size detection NoneT-1-2T-1-3