Canon ImageCLASS 2300 Copying Manual

Also see for 2300N - ImageCLASS B/W Laser: Specifications Basic guide Printer guide Setup Reference guide

Contents

Canon ImageCLASS 2300 Copying Manual Manual pdf 48 page image

Changing the Copy (Zoom) Ratio 2-17Basic Copying Features23 Set the copy ratio using the numeric keys press [OK].If you make a mistake when entering the value, press (Clear), and enter thecorrect value.If you enter a value outside the setting range, an error tone sounds. If the valueyou entered is less than 50, the copy ratio is automatically changed to 50%. If thevalue you entered is greater than 200, the copy ratio is automatically changed to200%. Enter a value within the setting range.The selected mode is set, the Copy Basic Features screen returns, and theselected copy ratio is displayed.4 Press [Start].Copying starts.NOTETo return the copy ratio to 100%, press (COPY RATIO) (DIRECT100%).To cancel all settings and restore the machine's standard settings, press(Reset).Auto ZoomThis mode enables you to have the machine automatically select the appropriatecopy ratio based on the size of the original and the selected copy paper. Theavailable copy ratios are from 50% to 200%.IMPORTANTYou cannot use the Auto Zoom mode with Automatic Paper Selection.You cannot copy highly transparent originals, such as transparencies, using the AutoZoom mode. Use the Preset Zoom or Zoom Designation modes.To use the Auto Zoom mode, your originals must conform to a standard paper size: 11'' x17'', LGL, LTR, LTR , or STMT.1 Press [COPY].lights, and the Copy Basic Features screen appears.CF1 F1COPYOK1 2 34 5 67 8 90@.GHIPQRSABCJKLTUVDEFMNOWXYZOPER SYMBOLSStartCOPY