Canon ImageCLASS 2300 Copying Manual

Also see for 2300N - ImageCLASS B/W Laser: Specifications Basic guide Printer guide Setup Reference guide

Contents

Canon ImageCLASS 2300 Copying Manual Manual pdf 19 page image

Placing Originals1-10Introduction to Copying1OrientationYou can place an original either vertically or horizontally. Always align the top edgeof your original with the back edge of the platen glass (by the arrow in the top leftcorner), or with the back edge of the feeder.NOTEIf the top edge of the original is not aligned with the back edge of the platen glass (by thearrow in the top left corner), prints may not be made correctly, depending on the modeyou have set.LTR originals can be placed either vertically or horizontally. However, the scanning speedfor horizontally placed originals is somewhat slower than for vertically placed originals.You can place originals horizontally when scanning with a Preset Zoom, such as whenenlarging LTR to 11" x 17" .Horizontally placed LTR originals are referred to as LTR .11" x 17" and LGL originals must be placed horizontally.To get the same output result when you are using the feeder as when the original isplaced on the platen glass, place the original upside-down and face up in the feeder.FeederPlaten GlassVertical PlacementVertical PlacementHorizontal PlacementHorizontal PlacementPlace theoriginalface down.Place the original face down.ABC Place theoriginalface up.ABC Place theoriginalface up.