Canon ImageCLASS 2300 Copying Manual

Also see for 2300N - ImageCLASS B/W Laser: Specifications Basic guide Printer guide Setup Reference guide

Contents

Canon ImageCLASS 2300 Copying Manual Manual pdf 22 page image

Placing Originals 1-13Introduction to Copying1FeederPlace a stack of originals in the feeder, and press [Start]. The machineautomatically scans them.You can place the following originals in the original supply tray:IMPORTANTDo not place the following types of originals in the feeder:- Originals with tears or large binding holes- Severely curled originals or originals with sharp folds- Clipped or stapled originals- Carbon backed paper or other originals that might not feed smoothly- Transparencies and other highly transparent originalsAvoid scanning the same original using the feeder more than approximately 30 times.Scanning the same original repeatedly may result in the original becoming folded or torn,which in turn could cause a paper jam.If the feeder rollers are dirty from scanning an original written in pencil, perform thefeeder cleaning procedure. (See Chapter 6, "Routine Maintenance," in the ReferenceGuide.)Item SpecificationsWeight 10 to 32 lb bond (37 to 128 g/m2)Place very thin originals: 10 to 14 lb bond (37 to 51 g/m2), or very thickoriginals: 28 to 32 lb bond (105 to 128 g/m2) into the feeder one at a time.Size 11" x 17" , LGL , LTR , LTR , or STMT .Tray Capacity 50 sheets (LTR or smaller)25 sheets (LGL or larger)