Canon ImageCLASS 2300 Copying Manual

Also see for 2300N - ImageCLASS B/W Laser: Specifications Basic guide Printer guide Setup Reference guide

Contents

Canon ImageCLASS 2300 Copying Manual Manual pdf 35 page image

Paper Selection2-4Basic Copying Features2Paper SelectionThis mode enables you to set the machine to automatically select the paper size, orto manually specify a paper size for a copy job.NOTEIf you are copying an original onto the same size paper at a copy ratio of 100%, theperiphery of the original image may be cut slightly on the copy. For details on the size ofthe margin areas, see Chapter 8, "Appendix," in the Reference Guide.For instructions on loading paper into the stack bypass, see Chapter 2, "BasicOperations," in the Reference Guide.Automatic Paper SelectionThe machine automatically selects the copy paper.IMPORTANTThe Automatic Paper Selection mode can be used when copying on the following papersizes: 11'' x 17'', LGL, LTR, and STMT.You cannot use the Automatic Paper Selection mode when copying the following types oforiginals. Copy these originals using the Manual Paper Selection mode.- Nonstandard size originals- Highly transparent originals, such as transparencies- Originals with an extremely dark background- Originals smaller than STMTIf the machine is operating in the Automatic Paper Selection mode, you cannot use theAuto Zoom mode, or Image Combination mode.NOTEThe default setting is 'AUTO PAPER'.You can set whether to activate or deactivate the Automatic Paper Selection for eachpaper drawer and the stack bypass. (See Chapter 3, "Selecting and Storing Settings," inthe Reference Guide.)You can use the stack bypass for the Automatic Paper Selection when:- The paper has already been placed in the stack bypass- The paper size is specified in 06 USE STACK BYPASS in the Common Settings menu- The Automatic Paper Selection mode is set to '02 ON' for the stack bypass in theDRAWER ELIGIBLTY menu. (See Chapter 3, "Selecting and Storing Settings," in theReference Guide.)