Canon FAXPHONE L75 Service Manual

Also see for FAXPHONE L75: User guide Specifications Setup sheet Software user's guide

Contents

Canon FAXPHONE L75 Service Manual Manual pdf 98 page image

4-5LASER CLASS 1060P Chapter 4: Maintenance & Service2.7 Paper Pickup RollerUsing lint-free paper dipped in isopropyl alcohol, wipe and dirt off the paper pickup roller.2.8 Transfer Charging RollerWipe with lint-free paper and remove any toner or paper debris.Do not touch or hold the sponge section of the transfer charging roller. Doing so can causemarks on back of paper or blank spots in copied or received images.Do not use solvents.Replace the charging roller if it is deformed or cannot be thoroughly cleared using lint-freepaper.2.9 Static Charge EliminatorWipe with a lint-free paper and remove any foreign matter, such as paper fragments.2.10 High Voltage TerminalWipe with a clean, soft, dry, lint-free cloth to remove any toner or paper debris.2.11 Fixing Entrance GuideWipe with a lint-free paper and remove any toner or paper debris.2.12 Paper Eject Face-up RollerUsing lint-free paper dipped in isopropyl alcohol, wipe off the paper eject face-up roller.2.13 FlapperWipe with a lint-free paper and remove any toner or paper debris.2.14 Document Feed Roller, Document Eject RollerWipe with a soft, dry clean cloth.2.15 Pressure RollerUsing lint-free paper dipped in isopropyl alcohol, wipe off the pressure roller.2.16 Fixing Ass’yUsing lint-free paper dipped in isopropyl alcohol, wipe off the fixing ass’y.2.17 Separation PadUsing cloth dipped in isopropyl alcohol, wipe off the separation pad.