Canon FAXPHONE L75 Service Manual

Also see for FAXPHONE L75: User guide Specifications Setup sheet Software user's guide

Contents

Canon FAXPHONE L75 Service Manual Manual pdf 25 page image

1-3LASER CLASS 1060P Chapter 1: General DescriptionTime required for transmission protocolPre-message Post-message Post-messageProtocol *1 Protocol *2 Protocol *3Mode (between pages) (after pages)T.30 Standard approx. 12sec. approx. 4sec. approx. 3.5sec.V.34 approx. 9sec. approx. 1sec. approx. 1 sec.*1 Time from when other facsimile is connected to the line until image transmission begins.*2 Post-message (between pages): Time from after one document has been sent untiltransmission of the next document starts if several pages are transmitted.*3 Post-message (after last pages): Time from after image transmission is completed until line is switchedfrom facsimile to telephone.Minimum transmission time 10 msec. (MH,MR), 0 msec. (MMR)Transmission output level from -8 to -15 dBmReceive input level V.34 from -9 to -43 dBmOther than V.34 from -6 to -43 dBmModem IC FM3362.3 Scanner SpecificationType SheetsADF capacity Max. 20 sheets (A4/Letter)Max. 10 sheets (Legal)Effective scanning width Letter/Legal 8.42" (214 mm)A4 8.19" (208 mm)Scanning method Contact sensor scanning methodScanning line densityStandard: 8 dots/mm (203.2 dpi) × 3.85 line/mm (97.79 dpi)Fine: 8 dots/mm (203.2 dpi) × 7.7 line/mm (195.58 dpi)Super Fine: 8 dots/mm (203.2 dpi) × 15.4 line/mm (391.16 dpi)Scanning speed Standard 7.7 sec./pageImage modes Halftone (PHOTO mode)Scanning density adjustment 3 density levelHalftone 64-gradation error diffusion system (UHQ)