67Advanced FeaturesChanging the FUNC. SettingsEContinuous Shooting and ExposureBracketing1. Set the camcorder to record still images on the card ( / )and set the mode dial to a position other than .If you are recording still images on the disc ( ), change the media for the stillimages ( 36).2. Press the DRIVE MODE button repeatedly to cycle between the drivemodes.3. Press the PHOTO button halfway to activate the autofocus.Continuous Shooting/High-Speed Continuous Shooting:4. Press the PHOTO button fully and hold it pressed down.A series of still images will be recorded as long as you hold the PHOTO buttonpressed.Auto Exposure Bracketing:4. Press the PHOTO button fully.Three still images in different exposures will be recorded on the memory card. The drive mode can also be selected from the FUNC. menu ( 60). The DRIVE MODE button cannot be used while the FUNC. menu is beingdisplayed.SINGLE Records a single still image.CONT.SHOOT.(Continuous Shooting)Captures a series of still images as long as you hold thePHOTO button pressed down. For the number of framesper second, refer to the table on the next page.HISPEED CONT.SHOOT.(High-Speed ContinuousShooting)AEB (Auto ExposureBracketing)The camcorder records a still image in three differentexposures (dark, normal, light in 1/2 EV steps), allowingyou to choose the shot you like the best.PHOTO buttonDRIVE MODE buttonMode dial
