126List of MessagesMessage ExplanationSET THE TIME ZONE,DATE AND TIMEYou have not set the time zone, date and time. This messageappears each time you turn the power on until you set the timezone, date and time.28CHANGE THE BATTERYPACKBattery pack is exhausted. Replace or charge the battery pack. 21TEMPERATURE TOOHIGH CANNOT RECORDThe camcorder has exceeded its operational temperature.Disconnect the compact power adapter and remove the batteryand let the camcorder cool down before resuming use.–TEMPERATURE TOOHIGH CANNOT REMOVEDISCCANNOT RECORDCHECK THE DISCThere is a problem with the disc. Replace the disc. 31This message can also appear if condensation has formed. Waituntil the camcorder dries completely before resuming use.132The disc’s recording surface may be dirty or scratched. –REACHED THEMAXIMUM NUMBER OFSCENESThe maximum number of scenes has been reached. Delete somerecordings (DVD-RW) to free some space or replace the disc.3186CANNOT PLAY DISC The disc is dirty or you attempted to play back a disc type notsupported (not DVD-R/RW).–This message can also appear if condensation has formed. Waituntil the camcorder dries completely before resuming use.132CANNOT EDIT DISC There are no scenes to edit or the recording is damaged. –This message can also appear if condensation has formed. Waituntil the camcorder dries completely before resuming use.132CANNOT DIVIDE THESCENEPhotomovie scenes cannot be divided. 88You may not be able to divide very short scenes. –Scenes cannot be divided when the disc contains 999 scenes. –You may not be able to further divide scenes shorter than 5seconds that were created by dividing a previous scene.–DISC IS FINALIZEDCANNOT RECORDYou cannot record additional scenes on a finalized DVD-R disc. –You cannot record additional scenes or unfinalize a DVD-RW discin VIDEO mode that was finalized with another digital device.UNFINALIZE THE DISC You cannot record additional scenes or convert still images to aPhotomovie scene on a finalized DVD-RW recorded in VIDEOmode. Unfinalize the disc first.101DISC IS PROTECTED The disc is protected. Replace the disc or remove the discprotection.89DISC ERROR Initialize new DVD-RW discs before using them. 90CANNOT READ THEDISCCHECK THE DISCDisc could not be read. Try cleaning it or replace the disc. 130This message can also appear if the camcorder has exceeded itsoperational temperature. Disconnect the power adapter andremove the battery and let the camcorder cool down beforeresuming use.–This message can also appear if condensation has formed. Waituntil the camcorder dries completely before resuming use.132The disc may not be loaded correctly. Try removing the disc andreinserting it.–
