CHAPTER 3 MECHANICAL SYSTEMSCOPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON DADF-H1 REV.0 MAR. 2001 3-193.2.5 Removing the platen roller1) Remove the feed station. (See P.3-16.)2) Remove two screws [1].F03-302-113) Remove platen guide L[2].Platen guide L [2], if detached,would require gap adjustmentwith the platen roller upon reas-sembly.Mark the notched part of platenguide L before removal to havethis mark aligned with the notchat reassembly to save the adjust-ment effort.F03-302-12[1][2]
