CHAPTER 3 MECHANICAL SYSTEMSCOPYRIGHT © 2001 CANON INC. 2000 2000 2000 2000 CANON DADF-H1 REV.0 MAR. 2001 3-133) Remove pin [4] to release separationroller [5].4) Remove washer [6] and pickup roller[7].Be careful not to lose pin [4]and washer [6] as they are de-tached at removal.F03-301-043.1.3 Mounting the pickup roller assembly1) With left and right stopper arms [1]erected, mount the pickup roller assem-bly so as to have the stopper armsplaced between separation roller shaft[2] and pickup roller shaft [3].Ensure that the lever position ofstop lever [4] will be positionedunder stopper arm [1].F03-301-052) Secure the pickup roller assembly byattaching two plastic E-rings [5] andtwo bushing [6].3) Replace the feeder cover inner cover inoriginal position and secures it withfour screws.F03-301-06[4][5][7][6][1][2][3][4][5][6] [5][6]
